NEW GSE 1/2HP 110V double piston pump. These pumps are brand new with a 1-year warranty. These come ready to attach a plug to, hard wire into a junction box, or splice onto a power cord. Easily accomplished with common household tools. These can run 2+ diffuser's up to 200' away over 20' + deep. 3.3 cfm up to 72+ psi. These are one of the smallest and least expensive pumps to Aerate ponds under 2 acres with 2-3 Diffusers. These come with Fan Guards, Muffler, and Capacitor only.
NEW GSE Brand 3/4 HP HIGH CFM Rocking Piston Compressor. These can run 4+ diffusers hundreds of feet away at over 20+ feet deep and are one of the least expensive more powerful pumps out there. Very durable and has a 1-year warranty. Model Number W400D2 MAX Flow of 4.94 CFM 140 LPM MAX PSI 44 @ 3 bar. INT. These come with Fan Guards, Capacitor, and Muffler. Ready to Hard wire or Splice onto a Cord or Plug.
2.068bar(30psi)
Current at rated load5.45A
Power at rated load600W(0.80HP) 3/4HP
Voltage/Frequency115V/60Hz
Starting Current19A
Net Weight (16.5lbs)
NEW Gast / EasyPro 1/2 HP HIGH CFM Compressor. Available in 110 and 220v. Draws 1.8 amps @ 10ft of operating depth (max is 3.1) 4.5 CFM Max Output @ 0ft of water depth. Maximum depth of 30 ft. Inlet/Outlet Size: 1/4" FPT
2-Year Limited warranty on compressor. Typical noise level less than 65db
Aerates ponds up to:
3/4 acre pond - 5' to 8' deep
1-1/2 acre pond - 8' to 12' deep
3 acre pond - 12' to 16' deep
These come with Fan Guards, Air Filter, Capacitor, 5' Power Cord, and rubber Mounts.
Available in 115v or 220v *Same price for either*
BUY THIS NOW for $737.99
Brand NEW 2 hp 7 CFM aftermarket 110V pump. These pumps are brand new with a 1-year warranty. These can run 4+ diffuser's over 300' away and over 20+ feet deep. Complete with Fan Guards, Power Cord, Filter, and Capacitor Only.
Typically has a lead time of 1-2 weeks to ship.
NEW Thomas 3/4HP Model in 220 Volt & 110 V - 1-year warranty - Replaces any Thomas, GAST, or GSE Pump - these are 3/4 hp double rocking piston style oil free continuous duty pump - These come w/ an air filter, fan guards, and capacitor. Ready to hard wire into a junction box or splice onto a cord. Can Aerate Ponds up to 2 acres and run 2-3 Diffusers over 200' Away.
NEW GSE 1 HP 116 PSI 4.6 CFM HIGH CFM HIG PSI Twin Headed Rocking Piston Compressor
Open Flow of 130 LPM / 4.59 cfm 8 bar ( 116 PSI )
Permanently lubricated bearings ● Oil-less, non-lubricated cup and cylinder ●
Long-life cup design ● Thin wall cylinder for good heat transfer ● Stainless steel valves ●
> 500M ohm Recoverable thermally protected motor ●
These come ready to attach to a plug / hard wire / or splice onto a cord.
Can run 4+ diffusers hundreds of feet away over 25+ feet deep. These come with 1 - intake filter, fan guards, and capacitor only.
NEW 3/4HP GAST / EasyPro HIGH CFM Compressor. Considered High CFM / Low PSI. Can run 6+ Diffusers hundreds of feet away. These are extremely powerful and recommended if you are wanting to put ALOT of diffusers in a Large Lake or Pond. These come w/ Filter, Capacitor, Power Cord, Fan Guards, and Motor Mounts all with a 2-year warranty! Aerates ponds up to:
1 acre pond - 5' to 8' deep
2 acre pond - 8' to 12' deep
4 acre pond - 12' to 16' deep
AMPS / Volts Cost per 24 Hrs CFM @ Water Depth Weight
4.5/115 $1.10 6.5@0' 6.0@10' 5.5@20' 5.2@40' 5.0@40' 26 lbs.
Available in 115v or 220v * Same price for either*
9.04 CFM 58 PSI Rocking Piston GSE Brand COMPRESSOR
Ready to hard wire into a junction box, attach a plug, or splice onto a cord.
Easily performed by household tools.
These can run 6+ Diffusers hundreds of feet away at depths over 20' to aerate lakes and ponds 2-6 + Acres!
1600Watt 2.14 HP
14.5 AMP
Open Flow 256 LPM ( 9.04 CFM)
Air Flow at rated Pressure - 180 LPM@4bar
Max. Continuous Pressure - 4 bar 58 PSI
Max. Pressure ( INT. ) 5 bar 73 PSI
82 DBA
Weight - 38.8 lbs.
Permanently lubricated bearings ● Oil-less, non-lubricated cup and cylinder ● Long-life cup design ● Thin wall cylinder for good heat transfer ● Stainless steel valves ● Recoverable thermally protected motor ● MUST have a cooling fan running on it when mounted in any enclosed area.
These come complete with an air filter, capacitor, and fan guards! We have complete service kits available for this model that is field serviceable in our store as well!
1/4 HP, 3/4 HP, and 1 HP Gast / EasyPro Rotary Vane Compressors
FROM 4.5 - 13 CFM! 1-year warranty.
These rotary vane compressors are specifically designed for the demanding job of 24 hour operation.
The oil-less design makes them ideal for pond aeration systems. Available in 1/4, 3/4, and 1 hp, 115v and 230v.
Long lasting, continuous duty compressors offer less depth capabilities than the diaphragm or rocking piston compressors but produce considerably more air.
Medium pressure, oil free compressors are excellent for pond and lake aeration and de-icing.
Carbon vanes self adjust to maintain maximum efficiency and are easily replaced when worn out
All models have an 18′ maximum operating depth, they come with air filter and 6′ power cord
Air outlet assemblies are available allowing one pump to supply up to 6 air manifolds.
BUY THIS NOW
1/4HP 115v - $845.99
1/4HP 230v - $845.99
3/4HP 115v - $1137.99
3/4HP 230v - $1137.99
1 HP 115v - $1,522.99
1 HP 230v - $1,522.99
These same Rotary Vane Compressors are available with Valves and Mounted in a Lockable Steel Cabinet as well.
All kits come with Valve assemblies with pressure gauge and pressure relief valve. All mounted in SC22 lockable steel cabinet with cooling fan and electrical outlet installed. Now also with 6′ power cord pre-wired to plug cabinet system into GFCI protected outlet. Kit does not include tubing or diffusers making it an ideal solution where custom tubing lengths and choice of diffusers can be purchased as needed. Connections are set up for 1/2″ ID tubing.
1/4 hp Rotary Vane RV33 compressor, 4.5 cfm, 2.3 amps, aerates up to 18′ deep. PA50ADLD kit includes compressor, two valve outlet assembly.
BUY THIS NOW - $1,669.99
3/4 hp Rotary Vane RV75 compressor, 10 cfm, 12 amps, aerates up to 18′ deep. PA75ADLD kit includes compressor, four valve outlet assembly.
BUY THIS NOW - $1,999.99
1 HP Rotary Vane RV100 13.5 cfm, 14 amps, aerates up to 18′ deep. Compressor Kit for ponds up to six acres depending on shape and depth of pond. 1 hp Rotary Vane RV100 compressor, 13.5 cfm, 14 amps, aerates up to 18′ deep. PA100ADLD kit includes compressor, six valve outlet assembly.
BUY THIS NOW - $2,529.99
Linear Diaphragm Air Compressors These are Ideal for Small ponds and de-icing.
These compressors combine outstanding performance with great value!
• Ultra quiet operation with very low energy usage
• Long life, even in continuous applications with minimal maintenance
• Operation at deeper than recommended depths will require more frequent replacement
of diaphragms
WE also have these available complete with Sink tube and Diffusers as well! Check out our listings for EasyPro Aeration Products to find this already bundled kits.
Medo Linear Piston Compressors are the highest quality air compressors available on the market today! High quality, continuous duty piston linear aerators are a prefect choice for summer and winter aeration needs.
These compressors utilize a small piston to pump air. They operate on electromagnetic oscillation witch eliminates sliding parts there by maximizing energy efficiency and extending motor life. It is common for them to operate continuously for seven to nine years.
Several advantages including:
Suitable for ponds 3000-7500 gallons
Super Quiet — you can barely hear them from only 5' away
Energy Efficient — operates for only pennies per day
Very Reliable — motors - Service life expectancy of 6 years with proper installation and periodic maintenance
Weather Resistant and Durable UL listed - for outdoor use / Does not have to be covered or protected.
Specifications:
Exclusive 3 Year Limited EasyPro Warranty )
Compressor draws only 45 watts Weather proof compressor housing 115V AC - 60hZ 5' power cord with plug
3/4" Air Outlet Size Rubber Elbow is included for outlet connection 1.8 CFM Max Output Maximum depth of 6ft
Approximate dimensions: 8.15" W x 8.07" H
Compressor Cfm Air Flow @ Water Depth Ship
Part # Watts Outlet Size 0' 2' 4' 6' 8' Depth PSI Weight Price / BUY IT NOW
ML28 26 5/8" 1.3 1.2 0.8 0.5 - 6' 2.6 8 lbs. $289.49
ML45 45 3/4" 1.8 1.7 1.5 1.1 - 6' 2.6 8 lbs. $338.39
ML60 60 3/4" 2.5 2.5 2.3 1.4 0.5 8' 3.5 13 lbs. $433.19
ML80 86 3/4" 3.0 2.9 2.8 2.1 1.2 8' 3.5 14 lbs. $456.69
ML100 95 1" 4.6 4.5 4.2 3.7 1.8 9' 4.0 22 lbs. $686.49
ML120 118 1" 5.2 5.1 4.8 4.5 2.6 9' 4.0 22 lbs. $719.29
ML200 215 1" 9.9 9.1 8.4 7.3 6.0 10' 4.4 28 lbs. $1165.79
KLC Series Linear Diaphragm Pumps
Linear Diaphragm Pond Air Compressors - These new compressors can supply adequate oxygen levels and circulation during hot summer months or deicing during freezing months.
When looking for great performance and quiet operation at a great value, search no further. The new KLC compressors from EasyPro feature energy efficient, quiet and reliable operation for aerating koi ponds, water gardens, fish tanks, aquariums or shallow larger ponds.
Power Cord / Volts: 6ft Grounded 120 V cord with plug
Outlet Size: 5/8" Warranty: Three (3) Year Limited Manufacturer's Warranty
Ultra quiet operation with very low energy usage
Long life, even in continuous applications with minimal maintenance
CUL and UL listed for outdoor use -- DOES not need to be covered or protected.
Compressor Outlet cfm Air Flow @ Water Depth of: Ship
Part # Watts Size Nominal) 0' 2' 4' 6' 8' 10' 12' 14' Weight Price BUY IT NOW
KLC25 23 5/8" 1.3 1 0.8 0.6 0.4 0.1 — — 7 lbs. $208.99
KLC40 36 5/8" 2.1 1.9 1.6 1.3 0.9 0.6 0.2 — 13 lbs. $265.79
KLC60 60 5/8" 3.1 2.8 2.4 2.0 1.6 1.2 0.7 0.3 15 lbs. $308.89
KLC80 70 5/8" 3.7 3.4 3.1 2.8 2.4 2.0 1.5 0.9 15 lbs. $379.79
KLC100 112 5/8" 4.2 4.1 4.0 3.6 3.1 2.5 2.0 1.2 21 lbs. $517.19
KLC120 130 1" 4.9 4.8 4.6 4.3 4.0 3.5 3.0 2.9 21 lbs. $587.99
Perfect for Aeration, septic, Koi /Pond, fish water gardens and more! All come with a 3 year warranty and are field serviceable!
GAST Regenerative BLOWERS. The industry choice when high oxygen, low energy consumption and reliable service is needed. • Blowers have only one moving part – the impeller – and since the impeller touches
nothing, there is no wear, no seals, no vibrations and no lubrication to be done
• 50 and 60 Hz operation, automatic thermal overload protection, UL approved and
CSA certified, can be mounted in any position, lightweight, durable and compact
• Includes inlet air filter and outlet bleed valve. • 6' power cord on all blowers 1 hp and smaller
Larger and three phase blowers are available — please inquire!
Amps @ Cfm Airflow at a Water Depth of: Max. Outlet Ship
Part # hp Volts 115v 20" 30" 40" 50" 60" Depth Pipe Size Weight Price
GB11 1/8 115/230 2.0 14 – – – – 29" 1/2" 24 lbs. $799.99
GB21 1/3 115/230 3.8 28 19 – – – 39" 1/2" 28 lbs. $982.99
GB31 1/2 115/230 5.6 35 27 19 11 – 52" 1/2" 37 lbs. $1057.19
GB41 1 115/230 9.8 73 64 52 28 – 58" 2" 45 lbs. $1123.29
GB415 1.5 115/230 20.7 110 102 88 78 64 63" 2" 65 lbs. $1545.19
GB51 2.5 115/230 23.6 135 125 111 100 82 65" 2" 83 lbs. $1891.49
GB63 5 230/460-3*
6 @ 460 Volt 188 178 167 157 147 105" 2" 115 lbs. $2415.89
1.5 HP units and above ship Motor Freight. Freight would be added to Price.
Gast blowers are also available as blower only, no inlet air filter or bleed valve. Ideal for replacement
applications where filter and bleed valve already exist. 6' power cord included on 1 hp and smaller units
Part # Description Ship Weight Price
GB11B 1/8 hp blower, no filter or bleed valve 21 lbs. $738.99
GB21B 1/3 hp blower, no filter or bleed valve 25 lbs. $869.99
GB31B 1/2 hp blower, no filter or bleed valve 32 lbs. $904.99
GB41B 1 hp blower, no filter or bleed valve 38 lbs. $1110.19
GB415B 1.5 hp blower, no filter or bleed valve 57 lbs. $1513.49
GB51B 2.5 hp blower, no filter or bleed valve 75 lbs. $1662.39
GB63B* 5 hp blower, no filter or bleed valve 104 lbs. $2271.19
Complete Filter Mpt Fits Ship
Part # Connection Blower hp Weight Price
SOL3 1 /4" 1/8, 1/3, 1/2 2 lbs. $51.19
SOL5 2" 1 3 lbs. $71.89
SOL7 2" 1.5, 2.5, 5* 4 lbs. $132.39
*5 hp blowers have two filters Replacement Filter Cartridge Includes canister and foam prefilter
Part # Ship Weight Price
SOL31 1 lb. $21.29
SOL51 1 lb. $34.99
SOL71 2 lbs. $54.69
Below we carry various brands of Linear Diaphragm Pumps - From Hi-Blow, Thomas, Gast, Blue Diamond, and MORE! As well as Complete Rebuild Kits for all models. Don't see something you need just send us an email or call us @ 214-529-9656
MATALA Brand
NEW HK-40 70 LPM Max
$179.00
NEW HK 60 80 LPM Max
$203.99
NEW HK 80 100 LPM Max
$256.00
NEW HK 100 120 LPM Max
$377.00
NEW HK 120LPM 138 LPM Max
$399.00
NEW HK 150 $579.00
NEW HK 200 $637.00
NEW HK 250L $877.00
Which Air Pump is right for you? Equipment Needed for Air Lift
Model / Item
HK-25 HK-40 HK-60 HK-80 HK-100 HK-120
The Hakko 150L, 200L, and 250L are the latest air pumps in our line of Hakko Linear Air Pumps.
These high volume pumps are suitable for ponds or lakes larger than 12,000 gallons.
•Very rugged, reliable and weather resistant.
•Outlet fitting is 1" OD.
•Power cord is 80 inches long (6.5 ft).
•Cast Iron body style.
•3 year Limited Warranty.
HK 150L has a maximum air flow of 210 liters per minute. Max depth 13 ft deep.
HK 200L has a maximum air flow of 290 liters per minute. Max depth 12 ft deep.
HK 250L has a maximum air flow of 370 liters per minute. Max depth 13 ft deep.
Rated Voltage (V) AC 115 (AC 110/115/120 or AC 220/230/240) AC 115 (AC 110/115/120 or AC 220/230/240) AC 115 (AC 110/115/120 or AC 220/230/240) AC 115 (AC 110/115/120 or AC 220/230/240) AC 115 (AC 110/115/120 or AC 220/230/240) AC 115 (AC 110/115/120 or AC 220/230/240)
Power Supply Frequency (Hz) 56 / 60 56 / 60 56 / 60 56 / 60 56 / 60 56 / 60
Normal Pressure Bar (psi) 0.1 (1.42psi) 0.13 (1.85psi) 0.15 (2.13psi) 0.15 (2.13psi) 0.18 (2.56psi) 0.20 (2.84psi)
Rated Performance lpm (cfm) 21 51 68 86 105 121
Power (W) 17 40 63 85 116 126
Noise Level (dB) 32 35 38 38 40 42
Closed Pressure / Bar 0.26 0.38 0.46 0.54 0.45 0.54
Closed Pressure / psi 3.7 5.5 6.7 7.8 6.5 7.8
Weight (kg) 2.9 / 6.27 5.4 / 11.9 6.3 / 13.8 6.3 / 13.8 8.9 / 19.6 8.9 / 19.6
HIBLOW PUMPS
We have manufactured air pumps for the pond and aquatic industries for over 30 years. We know that reliability, energy efficiency, and low sound levels are all extremely important for your aquatic systems. Whether you are aerating tanks on fish transport vehicles, operating a commercial fish farm, or just keeping your backyard pond in a healthy condition—you can depend on our HP series pumps for your application.
Product Details – HP-20, 40, 60, 80, 100, 150, 200 LPM Models available.
These range from $240+ for the HP- 20 to $740+ for the HP-200 Models - Call or email to purchase one today!
Available with integral low-pressure alarms for 120 VAC applications.
Standard UL approved 120 VAC models, and 230 VAC CE compliant models available.
Pumps equipped with thermal overload protection.
Contact us for custom voltage applications, including 12 to 48 VDC system applications using external PWM controllers for modulating pump flow.
Includes pressure tap location for external alarm sensor
CHOOSING THE CORRECT HIBLOW AIR PUMP
As you can see from the options above, there are many different sizes of Hiblow air pumps to choose from. Below is further information that breaks down the difference between all of the Hiblow models that are available.
HIBLOW HP VS XP SERIES
The Hiblow HP series has long been considered the best linear pump available on the market. Since 2002, the HP series has led the industry in product reliability. The HP series continues to be the workhorse of the Hiblow product line.
AIR FLOW VOLUME (LPM, CFM)
The most significant difference between the available Hiblow models is the air flow volume. This can be given in units of either cubic feet of air per minute (cfm) or liters of air per minute (LPM). The air flow volume of an particular model also depends on the operating pressure (p.s.i). On our website we give the CFM in terms of "open flow". This would be a maximum airflow rating with the air pump running at 0 p.s.i. As the pressure increases the air flow volume will decrease. The LPM metric that we give on our website is the volume of air at the pump's rated pressure. For the Hiblow HP-80 unit for instance, the maximum airflow is 4.2 cfm (119 LPM) operating at 0 p.s.i., and the rated air flow is 80 LPM (2.83 cfm) operating at the rated pressure of 2.13 p.s.i.
OPERATING PRESSURE
As mentioned above, as the operating pressure of an air pump increases the air flow volume decreases. Generally when installed on an aerobic treatment septic system, the Hiblow air pumps will operate at between 2-3 psi. If the Hiblow air pump is being used for pond aeration, it will depend a lot on the depth of water. It takes 0.43 p.s.i. to overcome 1 ft of water. All of the Hiblow pumps have a maximum continuous operating pressure rating. This is the maximum pressure that the pump can run at continuously in an application without causing damage to the unit.
PUTTING IT ALL TOGETHER
By determining the amount of airflow volume needed (cfm, LPM) and figuring out the operating pressure (p.s.i.) of the application, you can use the flow curves provided on the product pages to determine which Hiblow model will be best to provide the correct amount of air flow for your application.
WATER Feature Pumps for fountains, pond free systems, waterfalls, pond filter systems, and more!!
For larger systems, we offer the Sequence Primer Series. With an over-sized, integrated 250 cubic inch basket strainer, this unit is also self-priming. The high efficiency enclosed impellers ensure low cost, high flow performance for many years.
All Sequence Primer Series pumps come with Baldor® motors, 8 foot cord with 115V molded plug and stainless steel hardware. All Sequence Primer series pumps are covered by our 3-year warranty. The Sequence Primercan be wired for 115V or 230V.
•Out-of-pond construction - NOT Submersible!
•Ports are 2" FNPT suction and 2" FNPT discharge.
•Units are pre-wired with an 8' cord and molded 115V plug.
•Housing is molded of high strength, glass filled polypropylene.
•Quiet operation.
•250 cubic inch integrated strainer basket
•Dry run resistant mechanical seals.
•Stainless steel hardware is standard.
•The motors are TEFC, for excellent protection.
•Rebuildable, industrial grade motors.
•Three year limited warranty!
Max Flow: 6,800 GPH
Max Head: 19'
Watts: 369
Amps: 3.93
Volts: 115
Discharge Outlet: 2" Union or FPT
Inlet: 2" Union or FPT
Cord Length: 8'
Warranty: 3 Years
Call or Text for current Pricing
The Sequence Centrifugal Pumps are designed and built to meet the special needs of ponds, waterscapes and aquaculture. Buying quality products really pays. Not only do you get years of dependable service, but you enjoy tremendous savings on your electric bill every month.
The 750 and 1000 Series are the workhorses of the industry. They provide tremendous flow rates, with enough pressure (head) to handle the requirements of most systems with biological filters and moderate height waterfalls. They are also used extensively for the transfer and re-circulation requirements of filtration systems, water features, streams, fountains and aquaculture.
•Out-of-pond construction - NOT Submersible!
•Less than half the watt draw of comparable submersible pumps
•Ports are 2" FNPT suction and 1.5" FNPT discharge.
•Units are pre-wired with an 8' cord and molded 115V plug.
•Housing is molded of high strength, glass filled polypropylene.
•Quiet operation
•Dry run resistant mechanical seals.
•Stainless steel hardware is standard.
•The motors are TEFC, for excellent protection.
•Industrial grade motors.
•Three year limited warranty!
Max Flow: 3,600 GPH
Max Head: 12'
Watts: 139
Amps: 1.4
Volts: 115
Discharge Outlet: 1 1/2" FPT
Inlet: 2" FPT
Cord Length: 8'
Dimensions: 10.46" x 6.84" x 7"
Warranty: 3 Years
Call or Text for current pricing
The 750 Series is the workhorse of the industry. It provides tremendous flow rates, with enough pressure (head) to handle the requirements of most systems with biological filters and moderate height waterfalls. It is also used extensively for the transfer and re-circulation requirements of filtration systems, water features, streams, fountains and aquaculture.
•Out-of-pond construction - NOT Submersible!
•Less than half the watt draw of comparable submersible pumps
•Ports are 2" FNPT suction and 1.5" FNPT discharge.
•Units are pre-wired with an 8' cord and molded 115V plug.
•Housing is molded of high strength, glass filled polypropylene.
•Quiet operation
•Dry run resistant mechanical seals.
•Stainless steel hardware is standard.
•The motors are TEFC, for excellent protection.
•Industrial grade motors.
•Three year limited warranty!
Max Flow: 4,200 GPH
Max Head: 12'
Watts: 160
Amps: 1.56
Volts: 115
Discharge Outlet: 1 1/2" FPT
Inlet: 2" FPT
Cord Length: 8'
Dimensions: 10.46" x 6.84" x 7"
Warranty: 3 Years
Call or text for current pricing
BELOW are lots of other pumps we offer from External / submersible / water feature - waterfall and fountain Pumps to many others!