Below you will find some of De-icer systems we sell.
Protect your dock investment from costly ice damage.
Diffused air de-icing systems are an excellent choice for keeping water
open around boat lifts, docks, piers, marinas and other structures needing
to be ice-free in the northern climate.
A minimum of three foot deep water is needed for diffused air to be effective. Ice damage can be very costly and paying to have docks and boat lifts removed and installed every year has considerable cost. For just a few dollars per month in electric, a diffused air system will maintain open water and prevent these yearly expenses.
UP First are the Diffused Air De-Icing Systems for Ponds, Lakes, Marina's, and Docks.
Shallow Water Systems for 3'-6' depths
• Low electrical consumption; as low as $5 per month
• 1/2" Quick Sink tubing and self-weighted diffusers for
easy installation and optimal performance
Deep Water Systems for 7'+ depths
• Energy efficient; as low at $27 per month
• 3/8" Quick Sink tubing and self-weighted diffusers for
easy installation and optimal performance
Part # Description Max Dock # of Tubing Ship Weight (lbs.) PRICE
Length Diffusers Length BUY IT NOW
DKSW30 Shallow Water Kit 30' 2 50' 46, 27 $669.99
DKSW45 Shallow Water Kit 45' 3 100' 51, 54 $849.99
DKDW60 Deep Water Kit 60' 4 150' 23, 45, 35 $1299.99
DKDW100 Deep Water Kit 100' 6 325' 26, 61, 69 $1899.99
Next are Kasco's line of Water Agitator De-Icers
Kasco de-icers are designed to prevent the formation of damaging ice around
docks and boats. Thousands of these units are being used in marinas, harbors,
waterfront developments and recreational ponds to prevent costly ice damage.
De-icers come complete with power cord and two 20' suspension ropes.
Time and temperature control – save money in reduced electrical usage!
The controller (C20), designed exclusively for Kasco, will only operate when both the
timer and thermostat are activated, unlike regular timers which run the motor
every day at a set time. This controller will only operate when the temperature
requires it.
A temperature only controller (C10) is available that operates motor whenever freezing conditions exist.
Kasco de-icers can be used with the optional flotation kits (KFK) to create horizontal circulation. These circulators are excellent for de-icing applications but also have proven very effective for summer time use in preventing stagnant water. Used in marinas, bays or lake coves, irregular shaped ponds and other similar applications; these circulators
are a cost effective way to improve water quality. A 1/2 hp circulator can effectively circulate water in a one acre pond twelve feet deep. Circulators are an ideal choice for shallow bodies of water where diffused air systems do not work.
25' power cords standard on 115v de-icers and circulators,
230v units have 50' cord, longer cords available.
Part # Description Amps/Volts Ship Weight Price
KD12/2400D De-icer,1/2 hp 5.0/115v 25 lbs. $899.99
KD34/3400D De-icer,3/4 hp 6.7/115v 35 lbs $999.99
KD34H De-icer,3/4 hp 3.35/230v 35 lbs. $1089.99
KD44/4400D De-icer,1 hp 11.3/115v 45 lbs. $1089.99
KD44H De-icer,1 hp 5.7/230v 45 lbs. $1,199.99
C10 Temperature only controller 3 lbs. $169.00
C20 Time and temperature controller 4 lbs. $299.99
KDM Dock mount hardware (1" pipe supplied locally) 14 lbs. $559.99
KFK Flotation kit for circulators/de-icers 19 lbs. $599.99
Up Next are Scott Aerator De-icers -
These carry a 5 YEAR Warranty and are MADE IN THE USA!!
Slinger De-Icer
STARTING AT: $999.00
The Scott Aerator Company focused its 45 years of experience to develop a reliable, durable and convenient solution to ice buildup around: boats, dock pilings, boat houses, and any water-based dock structure.
The Scott Aerator Slinger De-Icer can be suspended from a boat, pilings or dock by using nylon ropes (included) to fasten. This de-icer removes and prevents ice by bringing warmer water from the bottom and sending it out in a continuous agitated movement. It easily adjusts to compensate for varying water levels, and its heavy-duty design holds up in fresh and salt waters. Made for use in hard-to-reach areas and rapidly changing conditions, it’s an economical solution to preventing ice formation in large marinas and dock areas.
Compare it to similar products and you’ll see why the Scott Aerator Slinger De-icer surpasses anything else on the market! Key differences include:
The De-Icer is oil-free. Other de-icers require oil to be added and changed frequently. Oil-filled motors can allow disastrous oil leaks, and they run slowly in cold water. Our De-Icer is engineered for all water temperatures.
The De-Icer runs at 3,450 rpm. Competitive de-icers, even those with 1-hp motors, run at fewer than 2,000 rpm. This means the Scott Aerator De-Icer moves 400 gallons per minute compared to the competitors’ 180 gallons per minute.
The De-Icer is manufactured using American-made stainless steel, even the motor. The competition utilizes galvanized metal.
The De-Icer comes standard with an unconditional, 5-year motor warranty. Competitve models warrant their de-icers for just two years.
GFCI required. Please disconnect power when swimmers are present. Greater cord lengths are available.
Proudly made in the USA. Oil and maintenance free
All of our fountains, aerators, de-icers, muck-movers and sub-surface aerators are oil-free and require almost no maintenance.
SPECIFICATIONS
5-year, unconditional warranty on motor.
400 gallons-per-minute flow rate.
Oil-free, environmentally friendly motor means no oil leaks!
Rugged, high-density polyurethane-and-stainless steel construction.
Motor specs: 115-volt, 60 Hz, single phase, 10 amps, 680 watts.
We also have 230-volt, many variations of 3-phase, and 50-Hz models available.
12-gauge, heavy-duty, 25-foot, submersible electric cord with Hubbell marine-grade plug included.
BUY IT NOW -
1/2 HP / 115 Volt units
25' Cord - $999.00
50' Cord - $1,099.99
100' Cord - $1,259.00
3/4 HP / 115 Volt Units
25' Cord - $1,195.00
50' Cord - $1,289.00
100' Cord - $1,459.00
1 HP / 115 Volts
25' Cord - $1,519.00
50' Cord - $1,597.00
100' Cord - $1,755.00
Scott Aerator Floating De-Icer
STARTING AT: $1,495.00
The Scott Aerator Floating De-Icer is designed to keep large water surface areas open in the winter. Suspended from a float approximately 2 feet below the water's surface, it removes and prevents ice by bringing warmer water from the bottom and sending it out in a continuous agitated movement. The Floating De-Icer easily adjusts for variations in water levels, and its rugged engineering is perfect for both fresh and salt water.
Compare to similar products and you’ll see why the Scott Aerator Floating De-Icer by far surpasses anything else on the market. Here are some of the differences:
The De-Icer is oil-free. Other de-icers require oil to be added and changed frequently. Oil-filled motors can allow disastrous oil leaks, and they run slowly in cold water. Our De-Icer is engineered for all water temperatures.
The De-Icer runs at 3450 rpm. Competitive de-icers, even those with 1-hp motors, run at fewer than 2000 rpm. This means the Scott Aerator De-Icer moves 400 gallons per minute compared to the competitors' 180 gallons per minute.
The De-Icer is manufactured using American-made stainless steel, even the motor. The competition utilizes galvanized metal.
The De-Icer comes standard with an unconditional, 5-year motor warranty. Competitive models warrant their de-icers for just two years.
GFCI required. Please disconnect power when swimmers are present. Greater cord lengths are available.
Specifications:
5-year, unconditional warranty on motor. 400 gallons-per-minute flow rate.
Oil-free, environmentally friendly motor means no oil leaks!
Rugged, high-density polyurethane-and-stainless steel construction.
Motor specs: 115 volts, 60 Hz, single phase, 10 amps, 680 watts.
We also have 230-volt, many variations of 3-phase, and 50-Hz models available.
12-gauge, submersible, 35-foot, heavy-duty power cord with Hubbell marine plug included.
BUY IT NOW -
1/2 HP / 115 Volt units
35' Cord - $1,495.00
50' Cord - $1,542.00
100' Cord - $1,799.00
3/4 HP / 115 Volt Units
35' Cord - $1,799.00
50' Cord - $1,842.00
100' Cord - $2,050.00
1 HP / 115 Volts
35' Cord - $2,095.00
50' Cord - $2,132.00
100' Cord - $2,309.00
Scott Aerator's Dock Mount De-icer
STARTING AT: $1,339.99
A heavy-duty, stainless steel dock plate, pipe, and yoke assembly suspend the Scott Aerator Dock Mount De-Icer under the water’s surface. It mounts quickly and easily to almost any type of dock, and can easily be adjusted to accommodate different water levels. The Dock Mount De-Icer keeps ice from forming by bringing warmer water from the bottom and sending it out in a continuous agitated movement. This helps prevent dock pilings from being jacked, or lifted, by acting as a buffer to prevent ice expansion and pressure damage. Under extreme, below zero winter conditions, our 1/2HP De-Icer will keep a minimum 50 foot diameter area ice free, and up to 70 feet using the 1HP model.
SPECIFICATIONS
5-year, unconditional warranty on motor.
Our ½ hp motor is rated at 400 gallons-per-minute flow rate.
Our ¾ hp motor is rated at 450 gallons-per-minute flow rate.
Our 1 hp motor is rated at 500 gallons-per-minute flow rate.
Runs at a constant 3,450 RPM's, 48 pounds of thrust achieved with the ½ hp motor.
12-gauge, submersible, 25-foot power cord with rugged Hubbell marine style plug included.
7 feet in length, 55 pounds.
Maintenance-free, environmentally friendly motors.
½ hp motor runs at 115 volts 10 amps, 680 watts.
¾ hp motor runs at 10.5 amps, 875 watts.
1 hp motor runs at 11.5 amps, 1095 watts.
Rugged, high-density polyurethane-and-stainless steel construction.
We also have larger 230-volt motors, many variations of 3-phase and 50-Hz models available. Just ask!
Under extreme, below zero winter conditions, our 1/2HP De-Icer will keep a minimum 50 foot diameter area ice free, and up to 70 feet using the 1HP model.
This Kit Includes
1 - DE-ICER HOUSING ASSEMBLY
1 - STAINLESS-STEEL POLE
1 - DOCK PLATE
1 - PACKET OF LUBRICATING COMPOUND
2 - STAINLESS STEEL THUMB SCREWS
4 - STAINLESS STEEL WASHERS
4 - SELF TAPPING STAINLESS STEEL SCREWS
Tools Needed
PHILLIPS STYLE SCREW DRIVER
TWO 1/2" WRENCHES (OR PLIERS)
115v Models available with Dock Plate only or With Dock Plate & Oscillator below
1/2HP Model w/ 25' Cord + Dock Plate $1,339.00 With Oscillator $2,299.00
1/2HP Model w/ 100' Cord + Dock Plate $1,609.00 With Oscillator $2,465.00
3/4HP Model w/ 50' Cord + Dock Plate $1,799.00 W/ Oscillator $2,639.00
3/4HP Model w/ 100' Cord + Dock Plate $1,959.00 W/ Oscillator $2,819.00
1 HP Model w/ 50' Cord + Dock Plate $1,979.00 W/ Oscillator $2,839.00
1 HP Model w/ 100' Cord + Dock Plate $2,159.00 W/ Oscillator $3,019.00
FREE-STANDING POST (ADD-ON) BUY IT NOW $495.00
Free-Standing Post
Where permanent structure is not available, the free-standing post add-on offers excellent flexibility for placement. Includes a sturdy, 8-foot post and the dock post bracket. Click here for details.
Oscillator Attachment
Our fully programmable oscillator attachment helps keep larger areas free from ice build-up without the need to purchase a second de-icer. The oscillator turns the de-icer in its mounting. It's pre-programmed to rotate in 20-degree increments every 20 minutes. You set it for any radius you wish. Then plug it in and forget about it! The oscillator attachment can be added at purchase or later after installation.
Oscillator Only - DIY with your own De-icer
BUY IT NOW 50' Cord - $869.99 with 100' Cord - $919.00
Compare to similar products and you’ll see why the Scott Aerator Dock Mount De-Icer far surpasses anything else on the market. Here are some of the differences:
Our De-Icer is engineered for all water temperatures.
The De-Icer runs at 3450 rpm. Competitive de-icers, even those with 1-hp motors, run at fewer than 2000 rpm. This means the Scott De-Icer moves 400 gallons per minute compared to the competitors' 180 gallons per minute.
The De-Icer is manufactured using American-made stainless steel, even the motor.
The competition utilizes galvanized metal.
The De-Icer comes standard with an unconditional, 5-year motor warranty.
Competitive models warrant their de-icers for just two years.
GFCI required. Please disconnect power when swimmers are present. Greater cord lengths are available.
